Jobsite: Encana Oil Mailroom (Dallas,TX)

Repair Scenario:  Achieve high-gloss concrete polish on existing concrete floor that was not protected during construction process.

Description:  TCR began by scraping floor with 8” scraper blades to remove all surface contaminants. Cleaned out all control joints and filled with Sherwin Williams Shercrete polyurea joint filler and cut flush with razor knife. We then began polishing the floor with 50/60 metal bond diamonds and continued the polishing process step by step up through 1500 grit resin pads. Applied lithium floor finish product and burnished with 1500 grit diamond impregnated polishing pad on 27” propane powered high speed-burnisher.